This post is a part of the R-Burst Quiltalong.
Ok, it's been a while, but I'm back with a quiltalong update. Today we'll be covering the optional embroidery squares for the R-burst block. For my quilt, I am making little 2" embroideries on solid fabric and mixed them in with my print squares, like this:
|As you can see, I'm chunking away! I haven't finished any complete blocks yet, eek!|
I'm using 3 embroideries per block, so I picked out a total of 36 patterns (info on where I found them is at the bottom of the post). My theme is various animals, and I definitely went for cuteness! For these blocks, the finished squares are only 2", so most likely you will have to re-size and trace any design that you buy (since most are bigger than that). That means that it is just as easy to use trace a picture or a line drawing, or even use a part of a coloring book page as it is to use an actual embroidery pattern.
For example, some of the embroideries that I did are based on cute art by Celesse. I just dropped her a quick note and got her permission to use them for embroidery and post the results on my blog. I also used drawings from this Japanese stamp making booklet that I learned about via Flickr.
|Finished bunny embroidery, based on Li'l Pun'kin art by Celesse|
Backstitch and little filler stitches as grass
As far as transferring embroideries, to start with I mark off my fabric in 2" squares, with half inch gaps between them for the seam allowance. I like to leave a full inch at the edges so that there is room for my embroidery hoop. The boxes help center the designs to that they aren't too close together and so that if I make any on the fly changes, I know where they will end up compared to the final quilt square.
I prepare the images by tracing any drawings that were in color so that I had all line drawings to work with, then I resize all of them so that the longest side was less than 2". Then I print out all the pictures on a sheet of paper and trace them onto my fabric using the blue washable pens from Joann's that come out with cold water. Make sure that you use the washable kind and not the disappearing-over-time kind... you don't want your marks to fade away before you are finished embroidering. I tape my sheet of patterns up on one of my windows (as a light box - the sunlight behind the glass makes the paper and fabric more transparent and the design easy to see) and trace out each design into the marked squares in my fabric. After that, "embroider as you like." Haha
|Another finished bunny, this one from the Japanese stamping book|
Used chain stitch, satin stitch, and running stitch
I wait until all of the embroideries on a particular fabric are done, then wash off all the pen with cold water. I heard that you should not iron your fabric or get hot water on it until the pen is gone, because otherwise it may become permanent. That has never happened to me, though. Let 'em dry and then iron them, then cut them into squares to add to your blocks.
Places to look for embroidery designs:
Etsy (like Penguin and Fish and sewdeerlyloved)